Architizer A+ Awards Recognize Door, Window, Glass Companies

Several door and window companies are recipients of the 2017 Architizer A+ Awards that acknowledge and promote the year’s best architecture projects and products.

Winners of the Building Products – Windows & Doors category:

  • Marvin Windows and Doors’ Ultimate Multi-Slide Door
  • PlybooDoo Panels by Krownlab
  • Pirnar’s Ultimum Pure with a One Touch handle
  • Slope sliding doors
  • Vitrocsa curved sliding door

Special mentions include: VanAir Vented Door, the M door hardware by Latch and the Centor Integrated Folding Door.

Winners of the Building Products – Glazing Systems & Products category:

  • View dynamic glass
  • The Vitrocsa Invisible Seal for sliding doors
  • The Vitrocsa Curved sliding door
  • LightGlass Privacy Plus
  • Wallen interior wall system by Adotta Italia

Over 400 luminaries and thought leaders in the fields of fashion, publishing, product design, real estate development, and tech make up the judge panel at the Architizer A+ Awards.

Winners, jurors, and VIPs will gather on May 11 at a red carpet gala that kicks off the weeklong NYCxDesign event in New York City.

Source: DWMMag

May is National Home Improvement Month

In honor of May, National Home Improvement Month, the National Association of the Remodeling Industry (NARI) is providing chapters and members with tools to get homeowners interested in remodeling this season.

To read the entire press release and download free resources, check

Don’t miss your opportunity to position your company or chapter as an expert during the Month of May.

Builders Name Marvin and Integrity Best in Quality

Builders and professionals in the industry have spoken, naming Marvin and Integrity best in quality in the wood/wood-clad and fiberglass window categories in the 2017 BUILDER Magazine Brand Use Study. This in-depth study evaluates which brands professional builders use most across 70 product categories, and how they rank in quality.

We know that the products we sell are the best in the industry, and builders have once again shown they agree.


6 Must-Do Outdoor Spring Home Maintenance Tasks

Spring is upon us and now is the perfect time to implement these 6 outdoor spring home maintenance projects.

1. Clean gutters

Consider this a bi-annual outdoor maintenance task. Look in gutter bottoms for loose granules that signal your asphalt roof may need replacing.

2. Inspect your roof

Look for curled and missing shingles, rusted and pitted flashing, and cracked caulk around pipe collars, skylights and other roof penetrations.

3. Repair paint

Scrape off any chipped and peeling paint and spot painting exposed surfaces.

4. Trim overgrowth

Spring is a good time to trim branches of shrubs and trees away from your house since you’re still able to see individual limbs. Keep branches 5 to 7 feet away from your home so they can’t conduct moisture onto your roofing and siding. This will also deter squirrels and raccoons from find their way to your attic.

5. Ensure good drainage

Check drainage to make sure the soil slopes away from the foundation walls at least six vertical inches over 10 feet.

6. Check foundation vents

Homes with crawl spaces have vents along the foundation walls. The vents provide air circulation that help dissipate excess moisture and prevent mold growth.

Want more details on these 6 maintenance tasks? Check out the rest at

Window Safety Week

Why is Window Safety Week Important?

Window Safety Week begins in April in accordance with the arrival of spring when homeowners are opening windows to allow the spring air to fill their homes.

Here’s the goal:

  1. Understand the role of windows for emergency escape
  2. Learn to safeguard windows against accidental falls

Your Home Escape Plan

  • Ensure windows are not nailed or painted shut
  • Remove all installed air conditioners from windows that may be used for escape
  • Meet safety requirements for at least one window in each bedroom
  • Remove guards, bars, and grilles from windows as they cannot be used for emergencies
  • Create an emergency escape plan and practice it both day and night
  • Keep an escape ladder nearby if you live in second or third-story bedrooms

How to Protect Children From Falls

  • Keep in mind, insect screens will not support the weight of children
  • Never leave children unattended around open windows
  • Keep windows closed when a child is within reach
  • Remove all furniture under windows as they are potential risks Keep children play space away from open windows or open spaces such as balconies

When is Window Safety Week?

April 3-9 is officially Window Safety Week this year



The Rise of The Traditional Home

In an age of Houzz and Pinterest, an unprecedented online buzz on both contemporary and traditional home design has inspired an openness to merging two distinctly different styles.

Inevitably, savvy homeowners tend to think, “I like parts of both.”

Welcome to the transitional home.

This fast-growing movement pays homage to contemporary and traditional home styles. For a home builder, it means a bet placed on constructing either style is a winning one. A transitional-minded home buyer is apt to transform any home style with tasteful, restrained elements of whatever suits them, traditional or contemporary.

Beyond Interior Furnishings

The transitional concept goes just beyond furniture and décor. It also marries traditional and contemporary architecture, finishes, and materials.

For example, a contemporary home might be expected to showcase large glass expanses to convey a sleek, light-infused interior. A transitional home can be just likely to include big glass. But it might welcome nature with oversized double-hung windows instead of large casement or picture windows.

Broad Appeal

One person who has observed the transitional movement up-close is Christine Marvin. Marvin, director of corporate strategy for Marvin Windows and Doors, says the trend defies a generational bias. “It spans all age groups,” Marvin says. “A lot of homes I’m seeing might be someone’s second or their ‘forever’ home. One older couple I know loves Scandinavian design. But they also like wood and big glass with homey, rounded-corner furniture and traditional rugs. It’s what they like. It’s very simplistic, uncluttered, warm, and livable.

The Beauty of Choice

Marvin says the buzz and floor traffic surrounding big glass displays at this year’s International Builders’ Show (IBS) is another example of a surging trend. “We had a contemporary studio collection at IBS,” Marvin observes. “These windows are specified for transitional design because traditional furniture and décor softens the look. You pick what resonates. That’s the beauty of transitional design.”

The good news for home builders is transitional styling checks all the boxes. The builder is free to recommend the best elements of contemporary and transitional home styling without sacrificing project aesthetics, value, and quality.

As Marvin says, “Home buyers find inspiration everywhere. It’s a different conversation today.

For more information on the transitional home, visit our sources: Builder Online and Marvin Windows and Doors.

This Old House, Generation Next to Benefit mikeroweWORKS

In 2017 mikeroweWORKS is going to give away a lot of work ethic scholarships. We’re not sure how many yet, but so far they have raised over $500,000, and they think that there is a lot more on the horizon. Along with the generosity of the people on their page, their partnership with This Old House is turning out to be rather remarkable.

This Old House, a diabolically simple TV show that’s been on the air for nearly a hundred years, has determined – quite rightly, that America’s skills gap poses a clear and present danger to anyone addicted to solid foundations, straight walls, sturdy roofs, affordable electricity, smooth roads, and indoor plumbing.

To help close the gap, Norm Abram and the crew of This Old House have launched an initiative called Generation Next – a targeted effort to encourage more kids to explore careers in the construction trades. 

As a part of Generation Next, This Old House wanted to offer a scholarship program, funded in part by sponsors of their show. But then, they stumbled across mikeroweWORKS, and realized that they’ve been doing the very same thing since 2008. So, rather than do the same exact thing, the they decided to let mikeroweWORKS handle it.

Additionally, the actual house featured on this season of This Old House will be auctioned off at the end of the year, and mikeroweWORKS will receive those funds as well. 

So – Mark your calendars. Sometime in March, there will be an announcing existence of another large pile of money, specifically for those willing to learn a skill that’s actually in demand. 

For more about the project, and the project, visit our source: Mike Rowe

9 Easy Home Upgrades for March

Make Tax Time Easier

Pull receipts, interest statements, and other crucial docs now to avoid future stress.

Retire Storm Windows

Cover and label them so you know which goes where, and store them vertically.

Shovel Lingering Snow

Use a plastic shovel to clear any residual snow and ice from decks to prevent boards from becoming warped or split

Help Out Your Yard

Order seeds for microclover now, and spread them on the lawn once the soil is workable for a boost of green all summer.

Reseal Exterior Joints

Look for small gaps around window and door trim, then remove any old caulk before filling with weather-resistant polyurethane sealant.

Inspect the Furnace

Remove the access panels and filter, clear out dust and debris with a vacuum attachment, then install a new filter.

Clean Dryer Vents

This is one spring-cleaning task that’s a safety essential, since the National Fire Protection Association reports that about 15,520 home fires per year are associated with clothes dryers. Detach the duct from the back of the dryer and use a long snake-type brush to remove flammable lint from the vent’s entire length.

Keep Kids Safe

National Poision Prevention Week (March 20-26) is a good reminder to be careful with household and garden chemicals, which can be fatal if ingested. To protect children in your home, take extra care to stow chemicals and items that come in easy-to-open bags, such as fertilizer, in a locked cabinet or shed. Always keep household cleaners in their original containers to avoid misidentification.

Check for Roof Damage

Winter snow and ice storms can take a toll on your roof, so it’s a good idea to scope things out now. There’s no need to walk on the roof – it’s safer for you and better for your roofing to take a peek from your ladder. Look for buckling, curling, or blistering shingles and for wear around the chimneys and pipes. If you spot something questionable, call in a pro.

Source: This Old House

How to Build a Space-Saving Workshop

The Building where Stefani Bachetti, who does research for an industrial-design firm, used to work had housed a large shop outfitted with a table saw, an assembly bench, and a drill press. So Stefani decided if she could no longer go to that shop, she’d bring one to her by converting her brick-walled one-car garage into a workspace for building small-scale furniture projects.

Filling her garage with saws, clamps would have been easy, but because t has to pull double duty, storing tools and her car during the winter, the layout required some problem solving. that’s where Tom Silva stepped in.

The solution focused on mobility. “Stefani has a long, narrow space, so we made the big tools easy to move around, letting her squeeze her car in,” explains Tom. He added a folding stand to a table saw she had placed on a work bench under the window, where it was too high to use comfortably. Tom shifted the saw to one of the long walls and, in front of it, built a Murphy table that folds up and out of the way when not in use. “The new bench is lower, about 32 inches off the ground, making it more comfortable when sanding or using hand tools,” he says. “But it also works as an outfeed support that prevents plywood or long boards you’re cutting on the table saw from falling down.”

Create Efficient Storage

This shop is short on space, but Tom added a few details that a workspace of any size can benefit from. He and Stefani hung a 2-by-8-foot strip of pegboard that she had attached to a frame of 2x4s and leaned up against the wall. “It was tucked behind the workbench, so you couldn’t access the lower part of the pegboard”, says Tom. Mounting the pegboard to the wall with masonry screws though a frame of 2x4s is the most economical way to keep frequently used tools close at hand and off the floor.

Install Soft Flooring

Inexpensive 2-foot-square foam floor mats keep your feet and back happy during long shop sessions and prevent dropping tools from crashing onto the concrete floor. The price: about $1 per square foot for 3/4-inch-thick foam. The interlocking tiles are easy to remove to make room for a car.

Add Ventilation

Tom fitted the top of a metal box fan with two threaded hooks that attach to two more hooks screwed into a 2×4 stretcher that spans the window. This will allow Stefani to pull fresh air during warmer months and blow out sawdust and fumes when she’s working.

Build a Murphy Table: Make the Frame

Start by making the tabletop support and legs. Build a frame from 2x4s and deck screws; this one is 46 by 34 inches. Add a couple of 2x4s across its width for stability. Cut a pair of 2x4s to 31 1/2 inches for legs so the table’s height is just below the saw. Screw utility hinges to the legs and to blocking between the frame and first joist. 

Attach the Frame to the Wall

Add three evenly spaced hinges to the back of the frame, then screw the other leaves to a 2×4 cleat. Holding the frame 3/4 inch under the finished height, temporarily support the cleat and drill five pilot holes. Fasten with masonry screws.

Top with Plywood

Tom sized the frame to support a two-piece top made with easy-to-transport 2-by-4-foot sections of 3/4-inch plywood. Lay down the first piece, as shown, then pull it away from the wall to create a 6-inch overhang, which will provide a surface to clamp to.

Attach the first section

Countersink pilot holes in the first piece of plywood, to prevent the screw heads from damaging chisels or a circular-saw blade. Fasten through the top into the frame.

Add the second section

Measure the distance between the first piece of plywood and the wall, and use a circular or table saw to rip a second piece to width to fill the void. Position the second piece of plywood, and drill countersink holes; fasten with screws.

Secure the latch

Fold the table up and mount a gate latch’s striker arm to a wood spacer that extends just beyond the frame front; fasten the space to the top’s underside next to the frame. Slip the latch behind the arm, so it catches. Drill pilot holes, then fasten with masonry screws.

To save floor space, Tom suggested a sliding miter saw with an articulating arm, instead of rails that stick out in back. The saw’s design lets Stefani make crosscuts in boards up to 14 inches wide with the saw resting up against the wall. Its wheeled stand has outriggers to support long boards or lengths of molding, is easy to move around, and folds to store flat against the wall.

Source: This Old House

Ten Questions to Ask When Hiring a Contractor

Architectural Digest asked Steve Fanuka to describe what questions you should ask a contractor-and yourself-before selecting somebody for the job.

  1. Are they quick to respond? I always give 48 hours. If you don’t get a call within that period, it may be a sign that the contractor doesn’t have enough time to take on your project.
  2. Are they accommodating? Remember, this is a date. Are they on time? Are they in a rush to leave? Do you get along with them? Do you agree with their opinions? You want to know that your contractor is going to put what it takes into your job. These details can be valuable forecasters of how they will perform.
  3. How big is your company? You ask this because you want to know who’s going to be on the job. If the owner or project manager can’t make it one day, will someone else come in his place?
  4. Are you licensed? Contractors must be licensed to perform electrical and plumbing work.
  5. Are you insured, and if so, can I be a certificate holder? Along with Workers’ Compensation to protect any laborer injured while working on your home, make sure your contractor has insurance to cover any accidental damages to your property. You want to be a certificate holder on both of these policies so that if the insurance ever expires, you will be notified and can hold off on further work until it is renewed.
  6. Can we have weekly meetings? When I’m doing a job, I like to have a weekly meeting so we can update the client and get all their questions answered.
  7. What are your payment terms? I like to use the American Institute of Architects contract – a basic agreement available for a small download fee that lays out a payment structure and other terms that protect the client, homeowner, and contractor. Keep in mind that if your project costs less than $500, you don’t usually need a contract.
  8. Are you willing to put in writing how long the job is going to take? I usually include a one-week grace period.
  9. Will you give a time frame for fixing any mistakes or imperfections I notice? Even the best contractors can miss things – a light-switch plate is off; a towel bar is loose. How long is it going to take them to come back and get these things up to standard?
  10. Will you come back after the job is finished? If I’m willing to pay you, can you service the job you did? If the light burns out, will you replace it? Hiring a contractor is like finding a good doctor. You want someone who can keep your project in good health after the job is done.

Source: Architectural Digest